PicoScope 4000 Series oscilloscopes

Model:4224A / 4424A / 4444 / 4824A / 4262

With 2-, 4- and 8-channel models available, the PicoScope 4000A Series boasts 12-bit hardware resolution (to 16 bits with Resolution Enhancement), 256 MS deep capture memory, 20 MHz bandwidth with 80 MS/s sampling speed, up to 70 dB SFDR and a built-in 14-bit triggerable signal generator and 80 MS/s AWG. A SuperSpeed USB 3.0 interface powers the instrument and delivers up to 160 MS/s communications to the host PC.


PicoScope 4000A Series

All models run with the popular PicoScope user interface and benefit from the free PicoSDK software development kit, which gives users direct programming control of the hardware for custom applications. The scopes also work with PicoLog 6 data logging software for lower-speed long-duration captures.

The following features come as standard on all 4000A oscilloscopes:

  • 2, 4 or 8 channels
  • 20 MHz bandwidth
  • 12-bit resolution
  • 256 MS capture memory
  • 80 MS/s sampling rate
  • 1% DC accuracy
  • ±10 mV to ±50 V input ranges
  • 10 000 segment waveform buffer
  • 80 MS/s AWG update rate
  • 14-bit resolution AWG
  • Low-cost and portable
  • SuperSpeed USB 3.0 interface
  • Split-screen waveform viewing
  • Up to 70 dB SFDR
  • Advanced digital triggering
  • Serial bus decoding
  • PicoScope and PicoSDK® software included

 

High-resolution differential USB oscilloscope

The PicoScope 4444 and its accessories offer accurate and detailed measurement for a multitude of applications.

 

PicoScope 4444 Differential Oscilloscope



Key features

  • 4 fully differential high-impedance inputs
  • 20 MHz bandwidth
  • Flexible 12 and 14-bit resolution
  • 256 MS deep memory
  • Rejects common-mode noise
  • Interface for intelligent probes and clamps
  • Low-voltage probe for millivolts to 50 V
  • 1000 V CAT III voltage and current probes for mains measurement applications

 

A digital oscilloscope for the analog world




PicoScope 4262 High Resolution Oscilloscope



PicoScope 4262

  • Dual channel oscilloscope / spectrum analyzer
  • 16-bit resolution
  • Low distortion (96 dB SFDR)
  • Low noise (8.5 µV RMS)
  • 5 MHz bandwidth
  • 16 MS buffer memory
  • Low-distortion signal generator
  • Arbitrary waveform generator
  • USB powered

ItemPicoScope 4000A Series
PicoScope 4444PicoScope 4262
Model4224A / 4424A / 4824A4444
4262
Number of Channels2/4/842 
Input TypeSingle-Ended BNC Fully Differential (D-Sub 9-Pin)Single-Ended BNC
Bandwidth (-3 dB)20MHz ( 50mV - 50V )
10MHz (10mV 、 20mV )
20MHz (  BNC Adapter )
15MHz ( PicoConnect 441)
5MHz (±20mV)
Vertical Resolution (Hardware)12 bit12 / 14 bit16 bit
Resolution EnhancementUp to 16-bitUp to 18-bitUp to 20-bit
Acquisition Memory256 MS256 MS16 MS ( USB Streaming )
Sampling Rate80 MS/sMax 400 MS/s10 MS/s
Maximum Input Voltage±50 VMaximum Probe-Dependent 1000 V CAT III± 50 V
Suitable ApplicationsMulti-Channel Systems, Embedded Development
CAN / I2C / SPI
Floating Measurements, EV / Power Electronics, Three-Phase Power, Differential CANAudio, Vibration, Ultrasonic, Precision Analog Analysis

Selection Guide: For safe measurements of floating or high-voltage differential signals, the PicoScope 4444 is recommended. For ultra-low-noise and high-resolution analog measurements, the PicoScope 4262 is the ideal choice.