DC Blocks
DC Blocks from HYPERLABS offer low insertion loss of up to 110 GHz. These parts are available in a variety of connector configurations and with various breakdown voltage and capacitance options.
HL9538 Broadband DC Blocking Adapter
The HL9538 is an ultra-broadband DC blocking adapter between series (1.0 mm to 1.85 mm) with a typical insertion loss of < 2 dB throughout the specified bandwidth range.
Incorporating both the DC block and the series adapter into a single device removes interfaces which improves overall system performance.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
HL8439 Broadband DC Block
The HL8439 is an ultra-broadband DC Block with a typical insertion loss of < 2 dB over an industry-best bandwidth of 16 kHz to 110 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 224 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL9439 Broadband DC Block
The HL9439 is an ultra-broadband DC Block with a typical insertion loss of < 2 dB to 110 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 224 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL8438 Broadband DC Block
The HL8438 is an ultra-broadband DC Block with a typical insertion loss of < 2 dB over a bandwidth of 16 kHz to 95 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 224 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL9438 Broadband DC Block
The HL9438 is an ultra-broadband DC Block with a typical insertion loss of < 2 dB to 95 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL9437 Broadband DC Block
This product was revised to fit a smaller housing in July 2022. Please refer to the datasheet for new dimensions.
The HL9437 is an ultra-broadband DC Block with a typical insertion loss of < 1 dB to 67 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL8437 Broadband DC Block
The HL8437 is an ultra-broadband DC Block with a typical insertion loss of < 1.5 dB throughout the specified bandwidth range.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL9435 Broadband DC Block
This product was revised to fit a smaller housing in July 2022. Please refer to the datasheet for new dimensions.
The HL9435 is an ultra-broadband DC Block with a typical insertion loss of < 1 dB to 50 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL8435 Broadband DC Block
The HL8435 is an ultra-broadband DC Block with a typical insertion loss of < 1.5 dB throughout the specified bandwidth range.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL9434 Broadband DC Block
This product was revised to fit a smaller housing in July 2022. Please refer to the datasheet for new dimensions.
The HL9434 is an ultra-broadband DC Block with a typical insertion loss of < 1 dB to 40 GHz.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.
HL8334 Broadband DC Block
The HL8334 is an ultra-broadband DC Block with a typical insertion loss of <0.75 dB throughout the specified bandwidth range.
The DC block will remove DC bias from the input signal to prevent damage to DC-sensitive devices or equipment.
These devices are suitable for use in 112 Gbps PAM4 communications systems, optical communication systems, high-speed data systems, level shifting, cascading, and interfacing between devices with incompatible DC operating points.